Nylon 12 Filament | Technical Specs

RDMFilament.com

NYLON 12 Technical Specifications: Nylon-based resin. High impact resistance and elongation to break, with high temperature resistance and environmental stability. For applications requiring extreme durability…..

  • Opaque/white
  • Stiff
  • Tough

 

PROPERTY TEST METHOD VALUE
Part Density ASTM D792 1.02 grams/CC
THERMAL CHARACTERISTICS TEST METHOD VALUE
Melting Point ASTM D3418 181 Deg C
Heat Deflection Temp @ 0.45 MPa ASTM D648 177 Deg C
Heat Deflection Temp @ 1.82 MPa ASTM D648 86 Deg C
MECHANICAL CHARACTERISTICS    
Melt Flow Rate (3min, 5.0kg, 235C) ASTM D1238 50 grams/10min
Ultimate Tensile Strength (XY) ASTM D638 48 MPa / 6,962 psi
Tensile Modulus (XY) ASTM D638 1,700 MPa / 247 kpsi
Flexural Modulus (XY) ASTM D790 1,500 MPa / 217 kpsi
Elongation at Break (XY) ASTM D638 24%
IZOD Impact Strength (Unnotched) ASTM D256 440 J/m
IZOD Impact Strength (Notched) ASTM D256 220 J/m
Volume Resistivity (22C, 50%RH, 500V) ASTM D257 3.1 x 10^14 ohm-cm
Surface Resistivity (22C, 50%RH, 500V) ASTM E257 3.0 x 10^14 ohm
Dielectric Constant (22C, 50%RH, 500V) ASTM D150 2.9

Actual part properties will be somewhat different from those listed above based on your specific running conditions as well as storage and handling. The above properties were based on virgin Nylon 12 tested by the manufacturer. Seller makes no warranties of materials for any particular application, nor does it make any warranty of any type, expressed or implied, including, but not limited to, the warranties of parts manufactured with this material for a particular purpose. All individuals and companies, public or private, should test the materials and final products fitness for use, the end product design/requirements and sales requirements.                     RDM2 LLC 2017 Support@RDMFilament.com